Welcome to Ningbo Hooosi Industry Co., Limited (Ningbo Hooosi Optronics Co.,LTD)
Home > Products > OTAP > 12CH OTAP 1X2 50:50 10GE MM OM3 1U



12CH OTAP 1X2 50:50 10GE MM OM3 1U

Category:12CH OTAP 1X2 50:50 10GE MM OM3 1U
Code:HOO-12CH OTAP 1X2 50:50 10GE MM OM3 1U

Product Features

Low insertion loss – minimize impact on data flows

Fully passive – monitoring infrastructure does not impact network availability

Does not modify traffic – tools see real copies of the packets from the network

Requires no power and does not have an IP address, providing safety from remote attacks

Cost effective – avoid costly expenses managing SPAN ports

Product


HOOOSI provide reliable continuous visibility 100% of network traffic to support performance and security with no network performance degradation or disruption.

HOOOSI Taps are flexible and scalable, can supports speeds up to 100G, and is 100 percent passive. HOOOSI Taps are available in multimode and single mode fiber varieties with split ratios ranging from 50/50 up to 90/10. The HOOOSI Tap is available with either LC/SC/FC or MTP (MPO) connectors. Up to 24 taps (24 input and 48 output, LC connector) can be deployed in a single 1U 19inch rack space.

The design of the HOOOSI Tap is optimized and tested for high-performance fiber networks ranging from 1G to 100G. HOOOSI Taps are deployed at any inline connection on the network, therefore no additional overhead or management burden is added to the network devices to copy traffic for the monitoring/security infrastructure. The HOOOSI Tap is compatible with all major manufacturers’ monitoring devices, including protocol analyzers, probes, and intrusion detection systems, and is protocol agnostic.



Product Introduction

12 OTAPS multimode 10GE OM3 850nm one split two, 50:50 split ratio, 12 input and 24 output, LC/UPC connector,1U 19inch rack

Application



Specification

Parameter

Data

Type

12 OTAPS(12 input and 24 output)

Operating Wavelengthnm

850nm

Splitting Ratio

50:50

Insertion Loss (dB) 50%

≤4.1

Insertion Loss (dB)50%

≤4.1

Loss Uniformity (dB)

≤0.8

Return Loss (dB)

≥50

PDL (dB)

≤0.15

Directivity (dB)

≥50

FIBER Type

OM3

Connector

LC/UPC

Dimension(mm)

1U 19Inch Rack 440*230*44MM

Operating Temperature

-40 ~ +85 


Notes:  1.Specifications without fiber connectors.

       2.Room temperature test .

Order information

       Part No.

Specification

1P2-4U01-XXXX

4 OTAPS single mode 1310/1550nm 4 input 8 output LC/UPC 1U

1P2-4U01-XXXXM

4 OTAPS multimode GE 850nm 4 input 8 output LC/UPC 1U

1P2-4U01-XXXXM3

4 OTAPS multimode 10GE OM3 850nm 4 input 8 output LC/UPC 1U

1P2-8U01-XXXX

8 OTAPS single mode 1310/1550nm 8 input 16 output LC/UPC 1U

1P2-8U01-XXXXM

8 OTAPS multimode GE 850nm 8 input 16 output LC/UPC 1U

1P2-8U01-XXXXM3

8 OTAPS multimode 10GE OM3 850nm 8 input 16 output LC/UPC 1U

1P2-12U01-XXXX

12 OTAPS single mode 1310/1550nm 12 input 24 output LC/UPC 1U

1P2-12U01-XXXXM

12 OTAPS multimode GE 850nm 12 input 24 output LC/UPC 1U

1P2-12U01-XXXXM3

12 OTAPS multimode 10GE OM3 850nm 12 input 24 output LC/UPC 1U

1P2-16U01-XXXX

16 OTAPS single mode 1310/1550nm 16 input 32 output LC/UPC 1U

1P2-16U01-XXXXM

16 OTAPS multimode GE 850nm 16 input 32 output LC/UPC 1U

1P2-16U01-XXXXM3

16 OTAPS multimode 10GE OM3 850nm 16 input 32 output LC/UPC 1U

1P2-24U01-XXXX

24 OTAPS single mode 1310/1550nm 24 input 48 output LC/UPC 1U

1P2-24U01-XXXXM

24 OTAPS multimode GE 850nm 24 input 48 output LC/UPC 1U

1P2-24U01-XXXXM3

24 OTAPS multimode 10GE OM3 850nm 24 input 48 output LC/UPC 1U

1P2-482U01-XXXX

48 OTAPS single mode 1310/1550nm 48 input 96 output LC/UPC 2U

1P2-482U01-XXXXM

48 OTAPS multimode GE 850nm 48 input 96 output LC/UPC 2U

1P2-482U01-XXXXM3

48 OTAPS multimode 10GE OM3 850nm 48 input 96 output LC/UPC 2U

1P2-40G-2UM-XXXX

2 OTAPS BIDI OTAP multimode 40GE OM3 850nm MPT(MPO)/UPC 1U

1P2-40G-4UM-XXXX

4 OTAPS BIDI OTAP multimode 40GE OM3 850nm MPT(MPO)/UPC 1U

1P2-100G-2UM-XXXX

2 OTAPS BIDI OTAP multimode 100GE OM3 850nm MPT(MPO)/UPC 1U

1P2-100G-4UM-XXXX

4 OTAPS BIDI OTAP multimode 100GE OM3 850nm MPT(MPO)/UPC 1U

REMART

XXXX mean split ratio(50:50/70:30/80:20/90:10), Or others

Sale service

Technical Support

Home  |   Products  |   Solutions  |   About us  |   support  |   Contact us
Ningbo Hooosi Industry Co., Limited (Ningbo Hooosi Optronics Co.,LTD)